Basic Units |
A Series Air Handler
- Blower performance up to 22,000 CFM
- Vibration isolation
- Horizontal or down discharge
- High efficiency motors
- Adjustable drive sheaves
- Removable doors for easy access
- Optional intake damper
- ETL Listed
Optional
- Motorized Intake Damper
- Gravity Intake Damper
|
A-D Series Direct Fired
- 19,000 to 2,500,000 BTUs
- 1,000 to 21,000 CFM
- Service doors on both sides
- Improved profile plate configuration
- Stainless steel burner
- 30 to 1 turn down modulation
- Electronic flame modulation
- Airflow switch
- Natural gas applications
- Economizer inlet thermostat
- Redundant gas valves
- 120 volt control transformer with single point electrical connection
- Intermittent spark pilot with timed safety lockout
- High temperature limit switch
- ETL Listed
Optional
- LP gas application
- Freeze protection
- High / Low gas pressure switches
- Room temperature controls
- Remote Panel
- Motorized Intake Damper
|
A-I Series Indirect Fired
- 200,000 to 800,000 BTU input
- 1,300 to 13,000 CFM
- Stainless steel burner, heat exchanger, and drip pan
- Electronic flame modulation
- Natural gas applications
- Power vent with proving switch
- Redundant gas valves
- Service doors on both sides for burner maintenance
- 120 volt control transformer with single point electrical connection
- Intermittent spark pilot with timed safety lockout
- High temperature limit switch
- ETL Listed
- Air Flow Switch
Optional
- LP gas application
- Freeze protection
- Room temperature controls
- High / Low gas pressure switches
- Remote Panel
- Motorized Intake Damper
|
A-E Series Electric Heater
- Rated up to 235KW and 400–22,000 CFM
- Controls for stand alone or integrated operation
- Redundant safety controls
- Electric coil safety equipment
- Temperature control system
- Contactor and overload
- Observation port
- 2 access doors to electrical controls and blower/motor assembly
- Motorized back draft damper
Optional
- Freeze protection
- Room temperature controls
- Remote Panel
- Motorized Intake Damper
|
Modules |
DX
- 3-50 ton cooling
- 1000-14,200 CFM
- 1 or 2 circuit coils
- Stainless steel drain pan
- Coil access doors
- Insulated casing
Hot Water
- Up to 1,186,920 BTU/Hr
- 15,700 CFM Max
- Coil Access Doors
- Insulated casing
Steam
- Up to 1,322,830 BTU/Hr
- 15,700 CFM Max
- Rated for 5 psi supply
- Coil Access Doors
- Insulated casing
Electric
- 10-235KW
- Staged heating control
- Airflow switch
- Blower interlock relay
- 400–22,000 CFM
- Coil access doors
- Insulated casing
- Power transformer
|
Mixing Box
- Up to 22,000 CFM
- Return and fresh air damper common linkage
- Single damper actuator
- Building static pressure control
- Electric 2-position control
- Manual potentiometer control
|
Screen Intake
- Intake screen keeps debris out of airstream
- Used where fan faces high velocity air
- Used on V-bank or evaporative coolers
|
V-Bank
- Up to 22,000 CFM
- 2” industrial metal mesh filters
- Large filtration area – low air velocity
|
Downturn Plenum
- Fully insulated
- Curb mountable
|
Sloped Intake
- 2” Industrial metal mesh filters
- Intake screen
- Rain gutters
|
Evaporative Cooler Intakes
- 2” Poly Media or 12” thick Kuul media
- Media is Removable
- Up to 22,000 CFM
- No moving parts
- Utilizes standard line water pressure
- Access door for media and controls
- Built-in water, filter, moisture control, and temperature switch
- No standing water reduces bacteria growth
Optional
- Freeze protection fill and drain kit
|
|